- Rockchip Flash Tool 1.37 Download
- How To Use Rockchip Flash Tool
- Rockchip Flash Tool Windows 10
- Flash Tool For Pc
Rockchip Flash Tool v1.7: RKBatchTool and USB Drivers: Download RKBatchTool v1.7. Unrar the update.img firmware archive, they are.rar and will need to be extracted then you must download and install the Rockchip USB drivers on your PC, these are in the Drivers folder in the RKBatchTool archive, make sure you install the correct version for. Qualcomm Flash Image Loader (QFIL) SPD FLASH TOOL. TECNO FLASH TOOL. Huiye FLASH TOOL. ODIN FLASH TOOL. QGDP FLASH TOOL. ROCKCHIP FLASH TOOL. Download the Proper Flashing Tool: RK3066 (Dual-Core) Firmware Image Flashing: English RKbatch Tool v1.5; RK3188 (Quad-Core) Firmware Image Flashing: English RKbatch Tool v1.6.
Download Flash Tool:-
• Rockchip Batch Tool
Rockchip Batch Tool Video
Rockchip Batch Tool Usage:-
Rockchip Batch Tool is used to flash Rockchip powered Android Smartphone & Tablet.
1- Download the package & extract Rockchip Batch tool folder.
2- Double click on RKBatchTool.exe to launch the tool on PC.
3- Click on the Box right to FW Path.
4- Select the firmware to be flashed which will lead to Loading of firmware in tool.
5- Switch off your Mobile or Tablet and Connect it to PC by pressing Power + Volume up + Volume down key. (Key combination can differ)
6- Do not release key until Icon 1 appear Green in color.
7- As your device get detected, Click on Restore to start flashing.
8- When Flashing is completed, Success message will appear.
Upgrade Guide can help you to reflash your device based on different RK SoCs
Rockchip Flash Tool 1.37 Download
This is a common guide for reflashing RockChip based devices. All RK SoC (RK3066, RK3188, RK3288, RK3229, RK3328, RK3399 and so on) supports the same applications and drivers for Host system, if 3rd party producers do not add any other limitations or special options. Differences can be in hardware parts, so you need to detect OTG port and recovery buttons correctly.
Notice: this guide is 100% working with Ugoos RK devices.
BEFORE START
What do you need:
- Image file
- Host PC
- USB OTG Cable
- Supported host OS: Windows XP (32/64bit) Windows 7 (32/64bit) Windows 8 (32/64bit) Windows 10 (32/64bit)
The first thing you need is to download the archive with firmware. Inside archive, you find:
- BatchTool or Android Tool - tool for reflashing (separate Android Tool and drivers you can download HERE)
- DriverAssitant - tool to install drivers and firmware image file
- Firmware image
INSTALLING DRIVERS
Launch RK DriverAssitant and press “Install Driver”
Apply all changes and warnings during installation until finishing message
CONNECTING TO PC
Run Batch tool or Android tool on your host PC.
In order to connect device with Host PC and run bootloader mode you should perform following steps:
1. Plug off device power adaptor.
2. Connect device to computer via usb OTG port, much better to use certified OTG USB cable from package.
3. Run Batch tool or RK Android tool
4. Hold the hardware recovery button.
5. Plug in power adaptor and Turn on device if not turning on automatically.
Tip: if you can’t hold recovery button or it’s broken you can reboot to bootloader from Ugoos power menu.
RECOVERY BUTTONS AND OTG USB PORTS LOCATION ON UGOOS DEVICES YOU CAN SEE IN THE END OF THIS INSTRACTION.
IF YOU USE ANDROID TOOL:
In Android Tool choose “Upgrade Firmware” tab. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “
Click “Firmware” button and specify the path to the firmware file. You need to wait until the program download information about the firmware, then it will display report on the screen. Now click “Upgrade” button to start reflashing device. At the end, you will see a report indicating a successful operation.
For flashing dualboot or clear linux firmware (for example dualboot UT3/UT3s/UM3 firmwares)
Run Android Tool. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “ In Android Tool choose “Download Image” inset. Default program configured to flash 'clear' android on your device. If you want install “Dualboot” or “Clear Linux” click right mouse button by program window, and then select “Load config”.
3. Then choose one of configurations files:
config.cfg - if want flash only Android
config_dualboot.cfg - if want flash dualboot
config_linux.cfg - if want flash only linux
3. Now click the “Run” button to start reflashing device. At the end, you will see a report indicating a successful operation.
IF YOU USE BATCH TOOL:
Main difference between Android tool and Batch tool is Batch tool can reflash several devices at the same time (6 max).
Run the Rockchip Batch Tool and click on the “…” to choose file with firmware. If you did everything correctly and the driver is installed on your computer, you will see green light on one of the indicators.
Now click the “Upgrade” button to the firmware of the device. At the end, you will see a report indicating a successful operation.
OTG usb ports and recovery buttons on Ugoos devices:
Ugoos UT4/UT3+/UT6
Recovery button and USB OTG port is on the right side
Ugoos UT3/UT3s (old version)
How To Use Rockchip Flash Tool
Recovery button and USB OTG port is on the right side
Ugoos UM3/UM4
Rockchip Flash Tool Windows 10
Recovery button is from the left to antenna connector
Flash Tool For Pc
OTG USB port is left one.
Ugoos UT5 Pro
Ugoos UM2
Ugoos UT2
Ugoos UT1
Find us: